Single-jet meter

The ETK-M/ETW-M surface-mounted water meter is a single-jet dry-running meter with option counter and impulse module.

Highest precision, modular retrofitting option with electronic modules and automatic barcode recording option are the performance characteristics of the ZENNER ETK-M/ETW-M water meter. The 8-digit counter allows litre-perfect reading results. We provide suitable models for typical consumption and usage in the residential or flat sector, with nominal flows of Qn 1.5 m³/h and Qn 2.5 m³/h or Q3 = 1.6 and Q3 = 2.5. 

With installed face-to-face lengths of 80 and 110 mm for ¾ inch thread and 130 mm for 1 inch thread, these will overcome almost every installation situation, hands down. The rotary meter head enables trouble-free reading in any installation position. The water meter can be superbly installed in dwellings or flats, both for the initial installation and for exchange installation.

Performance Characteristics

8-digit counter with module option for function extension
Ideal surface-mounted meter for recording consumption in dwellings and flats
ETK-M cold water meter version accurate up to 50° Celsius
ETW-M hot water meter version accurate up to 90° Celsius
Water meters for horizontal and vertical installation (horizontal and vertical dial)

Product Features
 

Length without connectors	80 mm 110 mm 115 mm 130 mm
Housing Material	Brass
Nominal Flow Q3 (≈ Qn)	Q3=1,6 (≈ Qn 1) Q3=2,5 (≈ Qn 1,5)
Nominal Diameter DN (mm)	DN 15 DN 20
Register	Dry Dial
Nominal Diameter (inch)	3/4 " 1"
Measuring Principle	Single-Jet Meters
Temperature	Cold Water up to 30° C Safe up to 50° C Hot sanitary water up to 90° C
Specified Units on Display	Cubik Meters (m³)
Additional Options	Anti-Magnet-Protection Protection Cap Copper Can (IP 68) Nano Coating (Antifog)
Metrological Class horizontal (max.)	R 80
Metrological Class vertical (max.)	R 25

Downloads

Catalogue ZENNER Apartment water meters
Technical Data ETK-M/ETW-M
Installation Instruction single-jet meters
Declaration of Conformity